Welcome, Guest
Username: Password: Remember me
CodeTyphon Linux OS Development, discussions and problems
  • Page:
  • 1

TOPIC:

Scripts not executed 5 years 10 months ago #11666

  • bernhard
  • bernhard's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 4
  • Thank you received: 0
Installed CTC latest version on UBUNTO
Most of the scripts are started but never completed the execution.
Strange effect observed : during OS shut down I see sudo request for user password input

Please Log in or Create an account to join the conversation.

Scripts not executed 5 years 10 months ago #11667

  • Sternas Stefanos
  • Sternas Stefanos's Avatar
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4506
  • Thank you received: 1100
Thanks Sir

Please gives us more Info

1) Did you give "sudo" root privileges to installation user?
2) Did you install "System Libraries" ?
3) Your PC RAM etc. ?


For Ubuntu you can read:

this Ubuntu 18.04
or
this Ubuntu 17.10
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

Last edit: by Sternas Stefanos.

Scripts not executed 5 years 10 months ago #11668

  • bernhard
  • bernhard's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 4
  • Thank you received: 0
thanks for quick response

a) did "username ALL=(ALL) NOPASSWD: ALL" in sudo config , also followed instructions here : askubuntu.com/questions/91598/how-do-i-login-as-root
b) done during CTC setup , can use CTC IDE ... did some simple tests under LINUX/UBUNTU
c) 3 GBYTE RAM using VM ware , host is WIN 7 x64

Please Log in or Create an account to join the conversation.

Last edit: by bernhard.

Scripts not executed 5 years 10 months ago #11670

  • Sternas Stefanos
  • Sternas Stefanos's Avatar
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4506
  • Thank you received: 1100
---1

NOT "username ALL=(ALL) NOPASSWD: ALL"

"username" is the login name to your OS

"login-name ALL=(ALL) NOPASSWD: ALL"

like
"sternas ALL=(ALL) NOPASSWD: ALL"
"muto ALL=(ALL) NOPASSWD: ALL"
"crazyhourse ALL=(ALL) NOPASSWD: ALL"

---- 2

To build Build-IDE 64bit you want RAM >=6Gbytes
To build Build-IDE 32bit you want RAM >=2Gbytes

To build Small-IDE 32 or 64bit you want RAM >=0.5Gbytes
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

Last edit: by Sternas Stefanos.
  • Page:
  • 1