Welcome, Guest
Username: Password: Remember me
General discussions, feature requests for CodeTyphon Project and discussions that don't fit in any of the other specific CodeTyphon forum categories.
  • Page:
  • 1

TOPIC:

CT 6.60 crash in lots of area 5 years 4 months ago #12944

  • Md. Shariful Alam Khan
  • Md. Shariful Alam Khan's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 111
  • Thank you received: 0
CT 6.60 crashed in lots of area under Windows 10. Code Compilation is not working sometimes, it shows totally wrong. Also if you want to add a unit then one exception caused and the unit and path not used in the project. Please see the attached zip file. Also, I can't debug console application.

Please Log in or Create an account to join the conversation.

Last edit: by Md. Shariful Alam Khan.

CT 6.60 crash in lots of area 5 years 4 months ago #12947

  • Sternas Stefanos
  • Sternas Stefanos's Avatar
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4511
  • Thank you received: 1101
Thanks Sir

We fix this problems in LAB CT, please wait for the next LAB CodeTyphon release
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

CT 6.60 crash in lots of area 5 years 3 months ago #12991

  • Md. Shariful Alam Khan
  • Md. Shariful Alam Khan's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 111
  • Thank you received: 0
Is those area fixed? I even can't compile though there is no error in the code.

Please Log in or Create an account to join the conversation.

CT 6.60 crash in lots of area 5 years 3 months ago #12992

  • Sternas Stefanos
  • Sternas Stefanos's Avatar
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4511
  • Thank you received: 1101
Our Lab will be close for the next 3 days.

Please give me about 30 min to pack and upload Lab CT ver 6.70 Revision 6675

It's the version I use now...

PS: Please try Lab CT ver 6.70 Revision 6675
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

Last edit: by Sternas Stefanos.

CT 6.60 crash in lots of area 5 years 3 months ago #12997

  • Md. Shariful Alam Khan
  • Md. Shariful Alam Khan's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 111
  • Thank you received: 0
That is strange as per your request I updated to CT 6.75 and after that, I can't debug. See for your self by downloading this video Typhon 6.7

Please Log in or Create an account to join the conversation.

CT 6.60 crash in lots of area 5 years 3 months ago #12998

  • Sternas Stefanos
  • Sternas Stefanos's Avatar
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4511
  • Thank you received: 1101
Thanks Sir
we will try to fix and this
Code Compilation works OK ?
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

CT 6.60 crash in lots of area 5 years 3 months ago #12999

  • Peter Heckert
  • Peter Heckert's Avatar
  • Visitor
  • Visitor
I can partially confirm this.

When singlestepping inside a thread, "step into" does the same as "step over" - it steps over.
There is no difference when I use keys, menu or toolbar.
Sometimes the assembly window pops up.

It seems to work in main thread, but I am not sure have not tried enough.
Edit: I tested again, using the ta_chart mandlebrot example. So far I can say, debugging singlethread programs works ok here.

Edit No.2: I tested again, now breakpoints and singlestepping in event methods. Test object again was the (singlethreaded) mandelbrot example.
Then I have seen almost the same effects as Md. Shariful Alam Khan has shown.
One has to try a little bit and use "step into", then it happens.

When I click the "Test" Button in the Debug-Project-Options, I get:

HINT: using config file C:\codetyphon\fpc\fpc64\bin\x86_64-win64\fpc.cnf
WARNING: ppu exists twice: C:\codetyphon\fpc\fpc64\units\x86_64-win64\fv\dialogs.ppu, C:\codetyphon\typhon\lcl\units\x86_64-win64\dialogs.ppu
WARNING: ppu exists twice: C:\codetyphon\fpc\fpc64\units\x86_64-win64\fv\menus.ppu, C:\codetyphon\typhon\lcl\units\x86_64-win64\menus.ppu

This all tested with Codetyphon 6.7, newest version 64 bit on Windows 10 and multithreading example from CodeOcean.

I did update very early. Could it be, I got an incomplete updated Version, should I try updating again? (Its time consuming)
Edit: Ctcenter says, everything is uptodate sorry no updated files available.

I didnt see problems with compiling, I compiled and tried some large examples from codeocean successfully.

Best regards!

Please Log in or Create an account to join the conversation.

Last edit: by Peter Heckert.
  • Page:
  • 1