Question CT LAB ver 7.10
- Sternas Stefanos
-
Topic Author
- Away
- Moderator
-
- Ex Pilot, M.Sc, Ph.D
here works OK
PilotLogic Architect and Core Programmer
Please Log in or Create an account to join the conversation.
- Daniel Jaeger
- Offline
- Junior Member
-
- Posts: 24
- Thank you received: 0
thanks for your feedback.
The problem was that i only removed the procedure 'PatternEditKeyDown' from ct_componentlist.pas and did not remove the referencing entry from the ct_componentlist.frm file either.
Thanks again.
Regards
Daniel
Please Log in or Create an account to join the conversation.
- Sternas Stefanos
-
Topic Author
- Away
- Moderator
-
- Ex Pilot, M.Sc, Ph.D
Thanks for your report and
have fun.
PilotLogic Architect and Core Programmer
Please Log in or Create an account to join the conversation.
- fredvs
- Offline
- Junior Member
-
- Posts: 170
- Thank you received: 1
I am on Debian 10.1, 64 bit, multi-arch.
I have numerous application 64 and 32 bit that works perfectly.
I did upgrade now to CT 7.1 but there is that error message:
make -C packager/registration
make[1] : on entre dans le répertoire « /usr/local/codetyphon/typhon/packager/registration »
/usr/bin/rm -f ../units/x86_64-linux/fcllaz.ppu
/usr/bin/mkdir -p ../units/x86_64-linux
/usr/local/codetyphon/fpc/fpc64/bin/x86_64-linux/ppcx64 -MObjFPC -Scghi -O1 -g -gl -l -vewnhibq -Fu. -Fu/usr/lib/fpc/3.3.1/units/x86_64-linux/rtl -FE. -FU../units/x86_64-linux -Cg -dx86_64 fcllaz.pas
Hint: (11030) Start of reading config file /usr/local/codetyphon/fpc/fpc64/bin/x86_64-linux/fpc.cnf
Hint: (11031) End of reading config file /usr/local/codetyphon/fpc/fpc64/bin/x86_64-linux/fpc.cnf
Free Pascal Compiler version 3.3.1 [2020/03/15] for x86_64
Free Pascal Compiler version 3.3.1 [2020/03/15] for x86_64
Copyright (c) 1993-2020 by Florian Klaempfl and others
(1002) Target OS: Linux for x86-64
(3104) Compiling fcllaz.pas
(10001) PPU Loading /usr/local/codetyphon/fpc/fpc64/units/x86_64-linux/fcl-db/db.ppu
(10011) PPU Source: db.pas not available
(10011) PPU Source: dataset.inc not available
(10011) PPU Source: fields.inc not available
(10011) PPU Source: datasource.inc not available
(10011) PPU Source: database.inc not available
(10011) PPU Source: dsparams.inc not available
(10028) Recompiling DB, checksum changed for /usr/lib/fpc/3.3.1/units/x86_64-linux/rtl/system.ppu
/usr/local/codetyphon/typhon/packager/registration/fcllaz.pas(11,3) Fatal: (10022) Can't find unit DB used by fcllaz
Fatal: (1018) Compilation aborted
make[1]: *** [Makefile:2892: fcllaz.ppu] Error 1
make[1] : on quitte le répertoire « /usr/local/codetyphon/typhon/packager/registration »
make: *** [Makefile:3366: registration] Error 2
mv: impossible d'évaluer 'typhon': Aucun fichier ou dossier de ce type
mv: impossible d'évaluer 'typhonstart': Aucun fichier ou dossier de ce type
mv: impossible d'évaluer 'typhonbuild': Aucun fichier ou dossier de ce type
mv: impossible d'évaluer 'tools/ctres': Aucun fichier ou dossier de ce type
mv: impossible d'évaluer 'tools/ctlrstofrm': Aucun fichier ou dossier de ce type
[INFO]: Clean Tools Directory
??????????????????????????????????????????????????????????
[ERROR]: Sorry, Typhon64 Small IDE x86_64-linux-gtk2 NOT Build
??????????????????????????????????????????????????????????
==============================================================
Build Typhon64 BIG IDE x86_64-linux-gtk2 for Linux
==============================================================
[ERROR]: Sorry, Typhon64 from Small-IDE NOT Build
please remove and build Typhon again...
_______________________________________________________________

Fre;D
PS: I did all the tips, removing and build all, install system dependencies from Typhon Center, but no, it refuses to compile Typhon 64 bit ( but Typhon 32 bit yes).
Please Log in or Create an account to join the conversation.
- fredvs
- Offline
- Junior Member
-
- Posts: 170
- Thank you received: 1
Huh, is it not possible to have a CT script that does not oblige to delete /usr/lib/fpc/3.3.1?
Thanks.
Fre;D
Please Log in or Create an account to join the conversation.
- fredvs
- Offline
- Junior Member
-
- Posts: 170
- Thank you received: 1
Sorry I am already back.
OK, Typhon 64 is running but when I compile a project, there is that message error:
Error: /usr/bin/ld : ne peut trouver -lglib
Error: /usr/bin/ld : ne peut trouver -lgdk
Error: /usr/bin/ld : ne peut trouver -lgtk
simpleplayer.ppr(20,1) Error: Error while linking
Strange because CodeTyphon Center say:
..........................................
[INFO] OS Libraries Dir for 64 : /usr/lib/x86_64-linux-gnu
..........................................
[ OK ] /usr/lib/x86_64-linux-gnu/libdl.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libc.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libpthread.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libX11.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libgobject-2.0.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libglib-2.0.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libgthread-2.0.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libgmodule-2.0.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libatk-1.0.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libXtst.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libfreetype.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libXxf86vm.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libz.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libGL.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libGLU.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libgdk_pixbuf-2.0.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libpango-1.0.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libcairo.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libpangocairo-1.0.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so Exists
[ OK ] /usr/lib/x86_64-linux-gnu/libgdk-x11-2.0.so Exists
..........................................
[INFO] OS Libraries Dir for 32 : /usr/lib/i386-linux-gnu
..........................................
[ OK ] /usr/lib/i386-linux-gnu/libdl.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libc.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libpthread.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libX11.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libgobject-2.0.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libglib-2.0.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libgthread-2.0.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libgmodule-2.0.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libatk-1.0.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libXtst.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libfreetype.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libXxf86vm.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libz.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libGL.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libGLU.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libgdk_pixbuf-2.0.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libpango-1.0.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libcairo.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libpangocairo-1.0.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libgtk-x11-2.0.so Exists
[ OK ] /usr/lib/i386-linux-gnu/libgdk-x11-2.0.so Exists
Please Log in or Create an account to join the conversation.
- fredvs
- Offline
- Junior Member
-
- Posts: 170
- Thank you received: 1
Sorry for the noise.
Fre;D
Please Log in or Create an account to join the conversation.
- Fernando
- Offline
- Junior Member
-
- Posts: 66
- Thank you received: 0
Seems to be a missing package.
Typhon 7.1 r2003082028 FPC 3.3.1 r2003081819 Platform : x86_64-win64-win32/win64
BIGIDE
Win 10 v1809
Try to open project C:\codetyphon\CodeOcean\lz_taChart\samples\print\printdemo.ctpr
The IDE complaints of Error: package load fail: lz_tachartprint
I cannot find lz_tachartprint anywhere, seems to be missing.
Please Log in or Create an account to join the conversation.
- Sternas Stefanos
-
Topic Author
- Away
- Moderator
-
- Ex Pilot, M.Sc, Ph.D
Someone forgot this pkg

Unzip attach file to
C:\codetyphon\typhon\components\lz_taChart\
folder
PilotLogic Architect and Core Programmer
Please Log in or Create an account to join the conversation.
- Fernando
- Offline
- Junior Member
-
- Posts: 66
- Thank you received: 0

Please Log in or Create an account to join the conversation.
- Sternas Stefanos
-
Topic Author
- Away
- Moderator
-
- Ex Pilot, M.Sc, Ph.D
Please Log in or Create an account to join the conversation.
- fredvs
- Offline
- Junior Member
-
- Posts: 170
- Thank you received: 1
The "MSEide-MSEgui" bug when compiling with fpc 3.3.1 trunk is fixed.
So with last commit of github.com/mse-org/mseide-msegui, with your compiler it works too.
Fre;D
Please Log in or Create an account to join the conversation.
- Sternas Stefanos
-
Topic Author
- Away
- Moderator
-
- Ex Pilot, M.Sc, Ph.D
PilotLogic Architect and Core Programmer
Please Log in or Create an account to join the conversation.
- Matis A.
-
- Away
- Moderator
-
We fix a lot of problems with this revision...
Update, build, test, report, suggest and
always have fun
PilotLogic Core Programmer
Please Log in or Create an account to join the conversation.
- skrzat
- Offline
- Junior Member
-
- Posts: 22
- Thank you received: 0
After installing package pl_CryptoLib4Pascal and rebuilding IDE, IDE doesn't start anymore

Please Log in or Create an account to join the conversation.
- Sternas Stefanos
-
Topic Author
- Away
- Moderator
-
- Ex Pilot, M.Sc, Ph.D
pl_CryptoLib4Pascal don't has register function(s).
it's a simple library and NOT Components library.
Just add this pkg to your project to use it.
To solve the IDE start problem
go to CTCenter =>Typhon-IDE=>Remove and build BigIDE
PilotLogic Architect and Core Programmer
Please Log in or Create an account to join the conversation.
- Jan Roza
-
- Away
- Junior Member
-
- Posts: 74
- Thank you received: 3
No glitches encountered yet, good job!
Operating Systems Windows 10 (64-bit) and virtual Linux Mint (64-bit)
Please Log in or Create an account to join the conversation.
- Sternas Stefanos
-
Topic Author
- Away
- Moderator
-
- Ex Pilot, M.Sc, Ph.D
your report is critical for us
PilotLogic Architect and Core Programmer
Please Log in or Create an account to join the conversation.
- Vbxler
- Offline
- Junior Member
-
- Posts: 31
- Thank you received: 0
The CodeTyphon Ver 7.10 revision 007060 version runs really very well.
But why is there a difference in the Typhon-Revision between Linux and Windows?
Thanks for the great work!
Please Log in or Create an account to join the conversation.
- Sternas Stefanos
-
Topic Author
- Away
- Moderator
-
- Ex Pilot, M.Sc, Ph.D
LAB CodeTyphon Ver 7.10 revision 007060 has
for ALL host OSes the same files in our servers
with:
-FreePascal 3.3.1 Rev : 2003240512
-Typhon V-IDE 7.1 Rev : 2003240512
Anything else are NOT correct.
You can get these values from
codetyphon/changeslog.txt file
Screen from Ubuntu -MATE 19.10 (MultiArch)
PilotLogic Architect and Core Programmer
Attachments:
Please Log in or Create an account to join the conversation.