Forum
× Lab CT Version, news, test results, new features request and suggestions

Question CT LAB ver 6.90

  • Peter Heckert
  • Peter Heckert's Avatar
  • Away
  • Junior Boarder
  • Junior Boarder
More
4 weeks 11 hours ago - 4 weeks 9 hours ago #13640 by Peter Heckert
Replied by Peter Heckert on topic CT LAB ver 6.90
I use Typhon 6.9 r61718 FPC 3.3.1 x86_64-win64-win32/win64 (on Win10 64 bit)

I can cross-build a 32 bit target without errors and an .exe file is generated.
When I start the exe from the IDE or directly without IDE, it doesnt run, it immediately terminates without any error messages.
It happens with console and with GUI programs and always.
If I set a breakpoint in the code, it is not hit.
So I think, there is a problem with the startup code.
If I build the same code with the Typhon 32 IDE, there are no problems.

Otherwise I like this new LAB version, thanks for your work!
Last edit: 4 weeks 9 hours ago by Peter Heckert.

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
4 weeks 9 hours ago - 4 weeks 9 hours ago #13642 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 6.90
Thanks Sir

On Win64 ct-FPC64 has some problems with cross-build for Win32 targets,
but working OK with NO Win 32bits, arm, aarch64 and 64bits cross-build Target.

Original FPC64 on Win64 has a lot of cross-build problems and with 64bits targets.

We try to fix these on Win64 cross-build to Win32 problems...
it's NOT so simple info1 info2

PilotLogic Architect and Core Programmer
Last edit: 4 weeks 9 hours ago by Sternas Stefanos.
The following user(s) said Thank You: Peter Heckert

Please Log in or Create an account to join the conversation.

  • Peter Heckert
  • Peter Heckert's Avatar
  • Away
  • Junior Boarder
  • Junior Boarder
More
4 weeks 8 hours ago #13643 by Peter Heckert
Replied by Peter Heckert on topic CT LAB ver 6.90
Now I install 64 bit crossbuild for the 32 bit IDE.
Is this recommended? (I try it anyway ;-) )
Or, is it possible to instruct the 64 bit IDE to use the 32 bit compiler?

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
4 weeks 8 hours ago - 4 weeks 8 hours ago #13644 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 6.90
Yes, if you build FPC32 compiler
CTCenter => Compiler => "FPC32 Build ALL"

But It's better to use Typhon32 IDE for Win32 app
just open CTCenter =>Typhon IDE => "Typhon 32, Build BigIDE"

CodeTyphon Support MultiArch Technology on MS-Windows 64,
Typhon32 and Typhon64 on the same OS without any problem.


PilotLogic Architect and Core Programmer
Attachments:
Last edit: 4 weeks 8 hours ago by Sternas Stefanos.

Please Log in or Create an account to join the conversation.

More
2 weeks 1 day ago #13667 by Matis A.
Replied by Matis A. on topic CT LAB ver 6.90
We release CodeTyphon version 6.90 Final
have fun...

PilotLogic Core Programmer

Please Log in or Create an account to join the conversation.

More
2 weeks 8 hours ago - 2 weeks 8 hours ago #13668 by gulyone
Replied by gulyone on topic CT LAB ver 6.90
Ok
I uninstalled completely 6.80, then i tried to install 6.90
32 bits ide all went fine but the bat file stopped its execution; so i openend CT center and asked to build 64bits ide
after a while the pipelined dos box flooded with exceptions and mem faults so i needed to RESET (LOL?!) my computer gone crazy
any clue?
windows 7 service pack 1 well updated/maintained 64 bits version
regards

I am back with 6.80 for now :-P
Last edit: 2 weeks 8 hours ago by gulyone.

Please Log in or Create an account to join the conversation.

More
2 weeks 6 hours ago - 2 weeks 6 hours ago #13669 by Matis A.
Replied by Matis A. on topic CT LAB ver 6.90
Thanks Sir
Did you have antivirus active in CT folder ?
Your RAM size ?

PilotLogic Core Programmer
Last edit: 2 weeks 6 hours ago by Matis A..

Please Log in or Create an account to join the conversation.

More
2 weeks 6 hours ago #13670 by gulyone
Replied by gulyone on topic CT LAB ver 6.90
ram 8Go, avirus is avast with exceptiion on ct folders

Please Log in or Create an account to join the conversation.

More
2 weeks 4 hours ago #13671 by Matis A.
Replied by Matis A. on topic CT LAB ver 6.90
Sir,
we test (again) CT 6.9 to Win7-64 with the latest OS updates
without problem

Please check your PC

PilotLogic Core Programmer
Attachments:

Please Log in or Create an account to join the conversation.

More
2 weeks 3 hours ago #13672 by Vbxler
Replied by Vbxler on topic CT LAB ver 6.90
On my win7 64bit computer with 16BG RAM,
CT6.90 I get many error messages.

When I open an existing project I get the following messages:
[Content]
Kann die Komponentenklasse "TLSTimeEdit" nicht finden.
Kann die Komponentenklasse "TAbZipper" nicht finden.
Kann die Komponentenklasse "TUniqueInstance" nicht finden.

Warning:
The project uses the following design time packages which might be needed to open the form in the designer.
If you continue, you might get errors about missing components and the form loading will probably create very unpleasant results.

It is recommended to cancel and install these packages first.
Unit allluicontrolsregister in Package pl_luicontrols 6.9.2
Unit ZComponentReg in Package pl_zeosdbo 6.9.2
Unit AllSolutionsReg in Package pl_solutions 6.9.1
Unit AllSolutionsRegIDE in Package pl_solutions 6.9.1

It is recommended to cancel and install these packages first.
Unit allluicontrolsregister in Package pl_luicontrols 6.9.2
Unit ZComponentReg in Package pl_zeosdbo 6.9.2
Unit allAbbreviaReg in Package pl_abbrevia 6.9.1

After installing the package codetyphon reboots but the messages come again.

On a computer with Linux Xubuntu 18.04 there are no problems, only a few buttons in the design view are strange.


Tomorrow I'll recompile CT in the office,
maybe there was a warning that did not pay attention.
Attachments:

Please Log in or Create an account to join the conversation.

More
1 week 6 days ago #13674 by gulyone
Replied by gulyone on topic CT LAB ver 6.90
problem solved for me :
in fact, even with exceptions set around folders, avast avirus came out of nonsense, SO i disabled it while building CT 6.90 and all went fine

Please Log in or Create an account to join the conversation.

More
1 week 6 days ago #13675 by gulyone
Replied by gulyone on topic CT LAB ver 6.90
hem win 32bits ide is chiped with 46 components pages while 64bits ide contains 164 components pages? is this new standard behavior? nevermind i'll install packages upon my needs, i guess
thanks

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
1 week 6 days ago - 1 week 6 days ago #13676 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 6.90
Yes
this is the standard behavior for ALL
32bit OSes.
To prevent Typhon32, Out of Memory Building Problem
Now Typhon32 need only 1Gbyte RAM to build.

PilotLogic Architect and Core Programmer
Last edit: 1 week 6 days ago by Sternas Stefanos.

Please Log in or Create an account to join the conversation.

More
1 week 6 days ago #13679 by Vbxler
Replied by Vbxler on topic CT LAB ver 6.90
Today I cleaned up again everything and
built a big IDE with CTC and everything
seems to work well.

Thanks for the new version!


Vbxler

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
1 week 6 days ago #13682 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 6.90
Thanks Sir
have fun

PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

More
1 week 2 days ago #13695 by fredvs
Replied by fredvs on topic CT LAB ver 6.90
Hello Sternas.

> You must post at FreePascal team mail-list,

OK, I did it:
free-pascal-general.1045716.n5.nabble.co...42375-td5734232.html

But no lot of help + answers there after last post. :(

So if you have a idea how to fix it, I vote for it.

Fre;D

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
1 week 2 days ago - 1 week 2 days ago #13697 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 6.90
We are working on this,
please give us time...

The first approach mseide-msegui Lib as CT package,
80% it's OK with some modifications.



PilotLogic Architect and Core Programmer
Attachments:
Last edit: 1 week 2 days ago by Sternas Stefanos.

Please Log in or Create an account to join the conversation.

  • Klaus Riesterer
  • Klaus Riesterer's Avatar
  • Offline
  • Junior Boarder
  • Junior Boarder
More
1 week 2 days ago - 1 week 2 days ago #13698 by Klaus Riesterer
Replied by Klaus Riesterer on topic CT LAB ver 6.90
Another really big problem with CT 6.90 Release is 'GetOrCreateWidgetInfo: MainWidget info was created causing a memory leak.':
www.mail-archive.com/lazarus@lists.lazar...de.org/msg08218.html
The error occures in my project in customform.inc:
procedure TCustomForm.Show on modal form;
begin
  if Application.Scaled and Scaled and (Monitor.PixelsPerInch<>PixelsPerInch) then
    AutoAdjustLayout(lapAutoAdjustForDPI, PixelsPerInch, Monitor.PixelsPerInch,
      Width, MulDiv(Width, Monitor.PixelsPerInch, PixelsPerInch));

  Visible := True; // Here the error is shown
  BringToFront;
end;

There is also some problems with ZEOS witch was already in 6.80 and in the Lab 6.90:
zeoslib.sourceforge.net/viewtopic.php?f=...146&p=128788#p128788

Because of the first error 6.90 is not useable for me.
6.80 is OK so far, but only when I use ZEOS from 6.70
Last edit: 1 week 2 days ago by Klaus Riesterer.

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
1 week 2 days ago #13699 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 6.90
Sir
one question before anything else

from http://uvviewsoft.com/cudatext/

CudaText is a cross-platform text editor, written in Lazarus.


Is this correct ?

PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

More
1 week 2 days ago - 1 week 2 days ago #13700 by fredvs
Replied by fredvs on topic CT LAB ver 6.90
Hello Sternas.

> The first approach mseide-msegui Lib as CT package,
> 80% it's OK with some modifications.

Wow, I am very excited to see this.

> We are working on this,
> please give us time...

Absolutely no worry, the excellent news is that msegui is not forgotten.

About the compatibility with fpc >= 3.3.1 rev 42375, I have to confess that, even with the explanation of Sven, I did not catch how to fix it.

Fre;D
Last edit: 1 week 2 days ago by fredvs.

Please Log in or Create an account to join the conversation.