× Lab CT Version, news, test results, new features request and suggestions

Idea CT LAB ver 5.90

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 years 9 months ago - 3 years 9 months ago #10184 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 5.90
Thanks Sir
last LAB revision 005850 has many changes...
Embedded Form Designer and Source Editor
are "hosted" now at a TPageControl not a TTabControl like previews revision 005840.

Give us time to test and solve the problem on Ubuntu 16.04 x86-64 xfce

PilotLogic Architect and Core Programmer
Last edit: 3 years 9 months ago by Sternas Stefanos.

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 years 9 months ago - 3 years 9 months ago #10185 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 5.90
I think, we found the problem

just replace codetyphon/typhon/ide/sourceeditor.pas

with attach file and rebuild Typhon IDE

PilotLogic Architect and Core Programmer
Attachments:
Last edit: 3 years 9 months ago by Sternas Stefanos.

Please Log in or Create an account to join the conversation.

More
3 years 9 months ago #10186 by Bram van Vliet
Replied by Bram van Vliet on topic CT LAB ver 5.90
Thanks for the lightning fast response!

I tried the patch and visibility of the source editor is restored. A new problem has appeared however. When docking the source editor with glassdocking enabled the ide crashes with a "invalid floating point operation".

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 years 9 months ago #10187 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 5.90
We will fix and this...:(

PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 years 9 months ago - 3 years 9 months ago #10188 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 5.90
And the final Fix :)

replace files in codetyphon/typhon/ide/ folder

Please test and report

PS: I must go to my home, all guys here gone .... Lab open again at 16:00 UTC

PilotLogic Architect and Core Programmer
Attachments:
Last edit: 3 years 9 months ago by Sternas Stefanos.

Please Log in or Create an account to join the conversation.

More
3 years 9 months ago #10190 by Bram van Vliet
Replied by Bram van Vliet on topic CT LAB ver 5.90
Thanks for the fast response again

I applied the patched files and the editor and ide are working fine now.

Strange thing i run in to now is that 2 of my (under active development) projects no longer work :-( One project gives a linker error without specification, exitcode 256 when compiling for Linux 64 bit but cross compiles to arm (beaglebone black) fine. The other project compiles and links fine for Linux 64 bit but after running sigsev's on updating a tmainmenu...

Compiling a empty new project works fine so i have to investigate further. Both projects compile, link and run fine under CT beta2

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 years 9 months ago - 3 years 9 months ago #10191 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 5.90
Thanks Sir

We are here for any other problem

PS: We prepare our LAB for tomorrow CT tests:

Sabayon_Linux_16.11_amd64_MATE.iso
manjaro-xfce-16.10-stable-x86_64.iso
OI-hipster-gui-20161030.iso (Openindiana with MATE)

PilotLogic Architect and Core Programmer
Last edit: 3 years 9 months ago by Sternas Stefanos.

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 years 8 months ago #10261 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 5.90
We release CodeTyphon ver 5.90 Final at 16-Nov-2016,
after a lot of work.
Please, test, report and suggest

PilotLogic Architect and Core Programmer
The following user(s) said Thank You: xcod

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #10264 by DiMiTRiOS
Replied by DiMiTRiOS on topic CT LAB ver 5.90
Problem with installation of CT590

error message of CTC .....

C:\codetyphon\typhon\components\pl_Graphics32MG\lib\i386-win32\win32\igGrid_ListView.ppu:igGrid_ListView.pas(50,10) Error: (1026) Compilation raised exception internally
Fatal: (1009) No memory left
Error: C:\codetyphon\fpc\fpc32\bin\i386-win32\ppc386.exe returned an error exitcode
make[2]: *** [Makefile:4141: typhon.exe] Error 1
make[2]: Leaving directory 'C:/codetyphon/typhon/ide'
make[1]: *** [Makefile:4559: ide] Error 2
make[1]: Leaving directory 'C:/codetyphon/typhon/ide'
make: *** [Makefile:3267: ide] Error 2
make: Leaving directory 'C:/codetyphon/typhon'
Error: (IDE) Build IDE: stopped with exit code 2
Error: (TyphonBuild) Building IDE: Building IDE failed.

? ?⟞? C:\codetyphon\typhon\*.exe

??????????????????????????????????????????????????????
[ERROR]: Typhon32 BIG-IDE NOT Build
??????????????????????????????????????????????????????

_______________________________________________________________

Terminate Action at 17/11/2016 9:21:43
Total time: 00:19:53.219
ExitCode : 0

AI can not win the natural stupidity

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 years 8 months ago #10265 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 5.90
Thanks Sir
please give us more info :
-Your OS
-Your PC RAM
etc...

PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #10267 by DiMiTRiOS
Replied by DiMiTRiOS on topic CT LAB ver 5.90
Intel (R) Core(TM)2 Duo E6550 @2.33 Hz με 2.00 GB RAM
και
MS WIN XP PRO 2002 SERVICE PACK 3
NVIDIA GeForce 8600GT

AI can not win the natural stupidity

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 years 8 months ago #10268 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 5.90
Sir
we don't use Windows XP in our lab
but
give us time to test in new VM XP installation today after 16:00 UTC

PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 years 8 months ago - 3 years 8 months ago #10270 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 5.90
Sir
the only solution is to build Typhon Big IDE with "minimum" number of Packages
-From Typhon Small IDE->Package->Install/Unistall Packages
-Import List from C:\codetyphon\typhon\files\pkgsconfxml\bigide_minimum.xml
-Rebuild Typhon IDE

FreePascal (Trunk) in CT 5.90, use a lot of memory to build Big Typhon32

Again, we don't use Win XP in our lab

PilotLogic Architect and Core Programmer
Attachments:
Last edit: 3 years 8 months ago by Sternas Stefanos.

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #10273 by DiMiTRiOS
Replied by DiMiTRiOS on topic CT LAB ver 5.90
OK. i will try this solution today. Otherwise i ll go back to CT5.80 or i will use
another machine with win7 or 8. Thanks anyway ....

AI can not win the natural stupidity

Please Log in or Create an account to join the conversation.

  • Klaus Riesterer
  • Klaus Riesterer's Avatar
  • Offline
  • User is blocked
  • User is blocked
More
3 years 8 months ago #10274 by Klaus Riesterer
Replied by Klaus Riesterer on topic CT LAB ver 5.90
I recommend you to use win 7 not 8. It's supportet also for the next 5 years and lot more stable

Mint Cinnamon 19.3 / CT 7.1 / FPC/Lazarus

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 years 8 months ago #10275 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT LAB ver 5.90
+1

PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.