Home

CT on Ubuntu 18.02 AArch64

We test LAB CodeTyphon 6.90 on Ubuntu 18.02 AArch64

Ubuntu MATE AArch64 is a community developed distribution, integrating the MATE Desktop Environment with Ubuntu at its core.
Whether you are using it on an old computer, or a powerful workstation, Ubuntu MATE is adaptable to any device, keeping them fast and usable.

More for Ubuntu MATE OS here dearth

 

Raspberry Pi 3 Model B is circuit-board computer that caused such a fuss in 2012.
This is the most powerful version. To some this may seem the sort of annual refresh from your favourite phone makers.
However, in adding greater power and both Wi-Fi and Bluetooth to the Pi without increasing the price, it's now a more versatile "all-in-one" board.

More for Raspberry Pi 3 Model B board here dearth

 

System: Micro level PC (Raspberry Pi 3 Model B) with 1CPU (4 cores) / 1 Gbyte RAM / 64 Gbytes Micro-SD / 1920x1080 pixels Monitor
OS : Ubuntu 18.02 AArch64 64bits with MATE Desktop (ubuntu-mate-18.04.2-beta1-desktop-arm64+raspi3-ext4.img)

 

 

 

 

OS things and stuff..

We use 64 Gbytes microSD for this test (microSDXC UHS-I Class 10 U3, Read/Write 100/60 MB/s)

We must enable swapfile to prevent ‘out of memory’ during compilation.
Install dphys-swapfile (dynamic swap space).


in a terminal exec

sudo apt-get install -y dphys-swapfile

set to dphys-swapfile configuration file CONF_SWAPSIZE = 1800 MBytes

sudo nano /etc/dphys-swapfile

and set:

CONF_SWAPSIZE=1800

 

Restart dphys-swapfile

sudo /etc/init.d/dphys-swapfile restart

Or

sudo /etc/init.d/dphys-swapfile start

 

 

 

Preparation-Give "sudo" root privileges

Open a terminal and exec

sudo nano /etc/sudoers

 

add at the end of /etc/sudoers the line

username ALL=(ALL) NOPASSWD: ALL

Ctl-X to exit and Y to save

 

 

Download-Unzip-Install

Download CodeTyphonIns.zip and unzip to your home directory

 

Open a terminal, and go to the new CodeTyphonIns directory

cd CodeTyphonIns

Start CodeTyphon Installation with command

sh ./install.sh

Give zero "0" to Install CodeTyphon

 

 

 

Setup and Build

After CT install you can start CTCenter or to continue with the open terminal.

It's the first installation of CodeTyphon on this Micro PC, so first we install "system libraries", select "0".

 

Select "8" to build all...

 

 

 

Finally

CTCenter and Typhon64 IDE with ALL Docked Option (single Window)