CT on Solaris 11.3
- Details
- Category: CodeTyphon Host OSes
- Published: Tuesday, 13 December 2016 04:16
- Written by Sternas Stefanos
- Hits: 9521
We test Lab CodeTyphon 6.00 on Solaris 11.3
Solaris is the world's most advanced enterprise operating system. It delivers security, speed, and simplicity for enterprise cloud environments and DevOps.
It's one of our LAB Reference OSes
More for Solaris OS here
System: Entry level PC with 1 CPU (4-Cores) / 8 Gbyte RAM / 120 Gbytes Hard Disk / 1680x1050 pixels Monitor
OS : Solaris 11.3 64 bits
1. Preparation-Give "sudo" root privileges
Open a terminal and exec
su
nano /etc/sudoers
add at the end of /etc/sudoers these lines
username ALL=(ALL) NOPASSWD: ALL
Defaults timestamp_timeout=-1
Ctl-X to exit and Y to save
2. Download-Unzip-Install
Download CodeTyphonIns.zip and unzip to your home directory
Open a terminal, and go to new CodeTyphonIns directory
cd CodeTyphonIns
Start CodeTyphon Installation with command
sh ./install.sh
Give zero "0" to Install CodeTyphon
3. Setup and Build
After CT install you can start CTCenter or to continue with the open terminal.
It's the first installation of CodeTyphon on this PC, so we select "0" to install "system libraries".
Select "8" to build all...
4. Finally

CTCenter, Typhon32 and Typhon64
5. Libraries tests
Screens from some Libraries tests...