Forum

× CodeTyphon Linux OS Development, discussions and problems

Question Scripts not executed

  • bernhard
  • Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
More
6 months 1 week ago #11666 by bernhard
Scripts not executed was created by bernhard
Installed CTC latest version on UBUNTO
Most of the scripts are started but never completed the execution.
Strange effect observed : during OS shut down I see sudo request for user password input

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar
  • Away
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
6 months 1 week ago - 6 months 1 week ago #11667 by Sternas Stefanos
Replied by Sternas Stefanos on topic Scripts not executed
Thanks Sir

Please gives us more Info

1) Did you give "sudo" root privileges to installation user?
2) Did you install "System Libraries" ?
3) Your PC RAM etc. ?


For Ubuntu you can read:

this Ubuntu 18.04
or
this Ubuntu 17.10

CodeTyphon Architect and Programmer
Last edit: 6 months 1 week ago by Sternas Stefanos.

Please Log in or Create an account to join the conversation.

  • bernhard
  • Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
More
6 months 1 week ago - 6 months 1 week ago #11668 by bernhard
Replied by bernhard on topic Scripts not executed
thanks for quick response

a) did "username ALL=(ALL) NOPASSWD: ALL" in sudo config , also followed instructions here : askubuntu.com/questions/91598/how-do-i-login-as-root
b) done during CTC setup , can use CTC IDE ... did some simple tests under LINUX/UBUNTU
c) 3 GBYTE RAM using VM ware , host is WIN 7 x64
Last edit: 6 months 1 week ago by bernhard.

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar
  • Away
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
6 months 1 week ago - 6 months 1 week ago #11670 by Sternas Stefanos
Replied by Sternas Stefanos on topic Scripts not executed
---1

NOT "username ALL=(ALL) NOPASSWD: ALL"

"username" is the login name to your OS

"login-name ALL=(ALL) NOPASSWD: ALL"

like
"sternas ALL=(ALL) NOPASSWD: ALL"
"muto ALL=(ALL) NOPASSWD: ALL"
"crazyhourse ALL=(ALL) NOPASSWD: ALL"

---- 2

To build Build-IDE 64bit you want RAM >=6Gbytes
To build Build-IDE 32bit you want RAM >=2Gbytes

To build Small-IDE 32 or 64bit you want RAM >=0.5Gbytes

CodeTyphon Architect and Programmer
Last edit: 6 months 1 week ago by Sternas Stefanos.

Please Log in or Create an account to join the conversation.