Forum

× General discussions, feature requests for CodeTyphon Project and discussions that don't fit in any of the other specific CodeTyphon forum categories.

Question CT 6.60 crash in lots of area

  • Md. Shariful Alam Khan
  • Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
More
1 month 1 week ago - 1 month 1 week ago #12944 by Md. Shariful Alam Khan
CT 6.60 crash in lots of area was created by Md. Shariful Alam Khan
CT 6.60 crashed in lots of area under Windows 10. Code Compilation is not working sometimes, it shows totally wrong. Also if you want to add a unit then one exception caused and the unit and path not used in the project. Please see the attached zip file. Also, I can't debug console application.
Attachments:
Last edit: 1 month 1 week ago by Md. Shariful Alam Khan.

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
1 month 1 week ago #12947 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT 6.60 crash in lots of area
Thanks Sir

We fix this problems in LAB CT, please wait for the next LAB CodeTyphon release

CodeTyphon Architect and Programmer

Please Log in or Create an account to join the conversation.

  • Md. Shariful Alam Khan
  • Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
More
3 weeks 6 days ago #12991 by Md. Shariful Alam Khan
Replied by Md. Shariful Alam Khan on topic CT 6.60 crash in lots of area
Is those area fixed? I even can't compile though there is no error in the code.

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 weeks 6 days ago - 3 weeks 6 days ago #12992 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT 6.60 crash in lots of area
Our Lab will be close for the next 3 days.

Please give me about 30 min to pack and upload Lab CT ver 6.70 Revision 6675

It's the version I use now...

PS: Please try Lab CT ver 6.70 Revision 6675

CodeTyphon Architect and Programmer
Last edit: 3 weeks 6 days ago by Sternas Stefanos.

Please Log in or Create an account to join the conversation.

  • Md. Shariful Alam Khan
  • Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
More
3 weeks 4 days ago #12997 by Md. Shariful Alam Khan
Replied by Md. Shariful Alam Khan on topic CT 6.60 crash in lots of area
That is strange as per your request I updated to CT 6.75 and after that, I can't debug. See for your self by downloading this video Typhon 6.7

Please Log in or Create an account to join the conversation.

  • Sternas Stefanos
  • Sternas Stefanos's Avatar
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
More
3 weeks 3 days ago #12998 by Sternas Stefanos
Replied by Sternas Stefanos on topic CT 6.60 crash in lots of area
Thanks Sir
we will try to fix and this
Code Compilation works OK ?

CodeTyphon Architect and Programmer

Please Log in or Create an account to join the conversation.

More
3 weeks 3 days ago - 3 weeks 1 day ago #12999 by Peter Heckert
Replied by Peter Heckert on topic CT 6.60 crash in lots of area
I can partially confirm this.

When singlestepping inside a thread, "step into" does the same as "step over" - it steps over.
There is no difference when I use keys, menu or toolbar.
Sometimes the assembly window pops up.

It seems to work in main thread, but I am not sure have not tried enough.
Edit: I tested again, using the ta_chart mandlebrot example. So far I can say, debugging singlethread programs works ok here.

Edit No.2: I tested again, now breakpoints and singlestepping in event methods. Test object again was the (singlethreaded) mandelbrot example.
Then I have seen almost the same effects as Md. Shariful Alam Khan has shown.
One has to try a little bit and use "step into", then it happens.

When I click the "Test" Button in the Debug-Project-Options, I get:

HINT: using config file C:\codetyphon\fpc\fpc64\bin\x86_64-win64\fpc.cnf
WARNING: ppu exists twice: C:\codetyphon\fpc\fpc64\units\x86_64-win64\fv\dialogs.ppu, C:\codetyphon\typhon\lcl\units\x86_64-win64\dialogs.ppu
WARNING: ppu exists twice: C:\codetyphon\fpc\fpc64\units\x86_64-win64\fv\menus.ppu, C:\codetyphon\typhon\lcl\units\x86_64-win64\menus.ppu

This all tested with Codetyphon 6.7, newest version 64 bit on Windows 10 and multithreading example from CodeOcean.

I did update very early. Could it be, I got an incomplete updated Version, should I try updating again? (Its time consuming)
Edit: Ctcenter says, everything is uptodate sorry no updated files available.

I didnt see problems with compiling, I compiled and tried some large examples from codeocean successfully.

Best regards!
Last edit: 3 weeks 1 day ago by Peter Heckert.

Please Log in or Create an account to join the conversation.